Feedback | Join Now

HOME | CURRENT | ARCHIVES | ANNOUNCEMENTS | ONLINE SUBMISSION | RESOURCES | ABOUT US
 
Transactions of the INDIAN CERAMIC SOCIETY   Vol. 75  2016
Phase Evolution and Stability of Aluminium Titanate Prepared by Solid-State Route: Effect of Two Different Particle Size of Al2O3
V. Singh, G. Jayarao and R. Mazumder
pages : 170-174
DOI : 10.1080/0371750X.2016.1193446
Abstract
Al2TiO5 (AT) powder was prepared by solid-state method using Al2O3 and TiO2 precursor powders. Effect of two different types of Al2O3 precursor powder (namely, Al2O3-M and Al2O3-N with average particle size of 4.2 m and 75 nm, respectively) on phase evolution and stability was studied. In the case of large particle Al2O3 precursor powder, AT phase was formed at 1500oC with a yield of 97%. Whereas, using nano-Al2O3 precursor powder, AT phase was formed at 1350oC with a yield of 91% and almost phase pure powder can be prepared at 1500oC. The stability of the AT pellet (sintered at 1500oC) was investigated by keeping the powder at 1150oC/6 h. It was observed from the XRD analysis that only 40% AT phase was retained in samples prepared with micron-size Al2O3. But in the case of the sample prepared using nano-size Al2O3, 93% AT phase was retained. [Keywords: Al2TiO5, Nano-Al2O3, Solid-state method]
Full text : Subscribe to Download Full Text
[Go Back]
 
MAIN PAGE | SITE MAP | PRIVACY POLICY | TERMS & CONDITIONS  | CONTACT US | FEEDBACK
Copyright © 2008-2026 The Indian Ceramic Society. All Rights Reserved

Managed by : htsm